If your house has been flooded or has experienced water damages, it must be restored as soon as possible. The longer you wait to get your home cleaned up after a flood, the more difficult it will be to fix the damages. Professionals must handle water removal and water damage restoration. The good news is that water damage removal procedures can be taken. But, how can the entire process be effectively done?
Water Damage Restoration Procedures
Since water can get contaminated, the following processes will be performed after turning off the electricity, wearing protective suits and masks to avoid electrocution. This guarantees that you can efficiently remove all stagnant water, leading to more severe problems like molds and mildew. Below are six practical steps in the water damage remediation procedure.
1. Water Extraction
Water extraction is done with gas-powered submersible pumps or wet-dry vacuum equipment. The depth and extent of the spill will identify which one you use. Do not try to clean water with a conventional vacuum cleaner for obvious reasons; you will only end up buying a new vacuum. Vacuum the carpet with the shop-vac unit, just like you would a floor. You’ll know it’s working because you’ll hear the water being drawn through the vacuum nozzle. All water should be eliminated before going on to the next steps of the restoration process.
2. Water Inspection and Clean Up
The procedure of flood cleanup includes completely cleaning up and disinfecting all moist surface areas and removing pollutants or microbial development. Examining the water quality and classifying it depending upon the extent of contamination is a part of the primary evaluation (level 1, level 2, or level 3).
3. Damage Inspection
After the excess water has been eliminated, it is essential to examine and evaluate the actual damage. Professional remediation specialists like PuroClean will develop a plan after assessing the damages. Everything in your home damaged by the water, like books, electronics, furniture, and files, must be included in this comprehensive plan of the drying and repair procedure.
4. Drying
Surfaces will appear to be dry after the excess water has been removed. However, a touch will show that they are still wet and keep a significant amount of moisture. Air circulation is the only technique to eliminate this water. Ensure that all of the windows and doors in the room are open so that fresh air may flow. High-velocity fans, blowers, and an air mover should be used.
5. Dehumidifying and Decontaminating
Often using high-capacity drying equipment is required. Every couple of hours, turn the units to guarantee completely dry. It may take many days for all material to be dry enough to avoid mold, mildew, and bacteria growth.
6. Restoration
Remember that water can enter into areas you may not expect. Try to find standing water in basements and crawl spaces and treat it correctly. Remember that neglected water can encourage mold growth, and once you have a mold issue, your problems will increase quickly.
The property is now dry so that the rehabilitation procedure can begin. This indicates that every parcel in the close surroundings can now be returned to its previous state. The technique varies based on property and equipment for wall surfaces, floor tiles, books, media, and furniture.